Cement foam insulation board equipment
one,Equipment introduction:
1,The special initial clotting kiln with special cement foaming can be produced normally all year round.
2,Only 8 to 10 minutes can be demoulded.
3,Automatic production line only needs 6 sets of molds to use.
4,Normal production only needs 4 ~ 6 person can.
5,3 to 5 minutes a mold, 1.2 cubic meters per mold, can produce 200-600 cubic meters per day, annual output of 50,000-200,000 cubic meters.
6,Mechanized production of large molds, cutting on all sides, low reject rate.
7,Automated production, labor intensity of workers is small, no need for cumbersome handling, online automatic cutting, automatic transport, female workers can also operate normally.
8,Exclusive 360-degree rotary cutting technology for dry or wet cutting.
9,It only takes about 10 minutes from the feeding to the finished product, and it can be sold for three days, saving a lot of space.
10,Different molds can be used to produce light quality partition board, fire door core board, thermal insulation decoration board, color steel plate, avoid steam block brick, space board.
two,Product weight:
|
Weight(kg/m3)
|
Compressive strength(Mpa)
|
Thermal Conductivity W/(m.k)
|
Water absorption(%)
|
|
70-150
|
0.25-0.45
|
0.038-0.045
|
≤5
|
three,Investment Introduction:
1,Device parameters:
|
Dimensions
|
Length 45 meters x width 7.5 meters x height 5 meters
|
|
Batching equipment
|
Length 13 meters x width 4.5 meters x height 4.5 meters
|
|
Equipment power
|
100-200KW
|
|
Equipment production
|
Nissan 200-600 cubic meters with an annual output of 5-20 million cubic meters
|
|
Production workers
|
4-8 people
|
|
Need factory building
|
800-1000 square
|
|
Need a venue
|
1000-1500 square
|
|
With water
|
10-20 tons/day
|
|
Electricity
|
200-300 degrees/day
|
|
Product raw materials
|
Cement, fly ash, aggregates, reinforcing materials, special materials
|
2,Product application scope: Suitable for building interior and exterior wall insulation, fire insulation belt, roof insulation and so on.
3,Project case:
four,Project appointment inspection:
All customers who are interested in cooperating with our company can make advance reservations via email and telephone. The two parties negotiate and arrange the specific inspection time, visit our base, look at the equipment on site, and look at the production process.
Fives,Delivery time and technical service methods:
1,Equipment delivery time: Under normal circumstances, the two parties can supply the company within 30 working days after signing the cooperation contract.
2,Perfect after-sales service: Our company's professional and technical personnel to plan the plant, guide the installation, commissioning equipment, technical training, until the customer can normally produce qualified products.
